How to Install Your Sealing Window Tape:

1. Clean the Surface:
   Wipe down the window or door frame with a dry cloth. Make sure the surface is clean, smooth and free of dust or grease for best adhesion.
   

2. Measure the Length:
   Measure each side of the window or door where the seal will be applied. Cut the sealing tape to the required lengths using scissors. (Include this part ONLY if we didn’t cut it to size already)
   

3. Peel the Backing:
   Gently peel off a small section of the adhesive backing to expose the sticky side of the tape.
   

4. Apply the Tape:
   Start from one corner and press the tape firmly along the edge of the frame. Continue peeling off the backing while pressing to ensure an even, tight seal.
   

5. Seal the Corners:
   For corners, cut the tape at a 45° angle or slightly overlap the ends to prevent gaps where air could leak through.
   

6. Check the Fit:
   Close the window or door to ensure it seals tightly but still opens smoothly. Adjust if necessary.
   

7. Enjoy the Comfort:
   Notice immediate reduction in cold drafts, noise and dust - creating a warmer, quieter and more energy-efficient space.
   

8. Remove or Replace Easily:
   When the season changes, simply peel off the tape. It leaves no residue and can be replaced with a new strip if needed. (It also keeps cold air inside during the summer).